When a predefined quantity (programmed within the code) of liquid has passed via the movement sensor, the relay robotically gets de-energised and the flow of liquid stops. At the same time, “Remove your pot/jug/cup” message is displayed on the first line of LCD1.
In order for you the identical quantity of liquid once more, you just swipe the RFID card again across the RFID reader. You can repeat this time and again till the amount of liquid within the container finishes.
As soon as the beverage has been dispensed, the cup 38 supported by the cup holder 12 strikes counterclockwise alongside the above talked about circular path until it’s in front of the person U to current the ready beverage remaining in place until a brand new beverage is requested. The cup holder with the cup and the prepared beverage stops on this place and does not return to the beginning position of cup dispensing in order to allow the person to remove the beverage with out haste. Once the beverage has been removed by the user, the cup holder dosing machine moves counterclockwise to the preliminary position after another beverage is requested, thus repositioning the 2 cup holder on the corresponding cup dispensing openings of the cup dispensing towers.
Conventional needle dispensing has quite a few disadvantages with respect to hurry, single dot measurement, course of stability (tailing, repeatability, clogging) and lastly the necessity to contact the board. In contrast, jet dispensing overcomes these limitations by a big margin. The jet head can dispense from up to ¼ inch from the goal surface and due to this fact be used on populated boards and cavities. Jet dispensing of glue dots has qualitative advantages over stencil printing and affords much higher flexibility because the number of dots and their size might be adjusted on the fly.